Tag Archives: glass gluing

My glass fusing journey – glue

To create some of my jewelart abstract glass pendants, I use glue to attach a bail onto the glass and I have to admit that gluing is one of my least favourite tasks, here are some of my adventures learning how best to use it.

You would think that gluing a bail onto a glass cabochon would be a piece of cake. But there is more to it than you think, for a start, you can’t just use any old glue…

Glass has got a smooth and cold surface and not all types of glue create a good bond, such as the hot glue guns. Superglue would glue a metal bail onto glass no problem, but then if you drop the glass it is more likely to shatter than using epoxy glue.

The epoxy adhesive creates a good bond and if the glass pendant is dropped, it takes the impact of the fall – rather than the glass, when superglue is used – but this weakens the glue’s bond. Another problem with epoxy glues is that in very hot weather the glue can melt.

Before you begin to glue, you first have to roughen/sand the part of the glass and bail to be glued, followed by cleaning them with acetone, and then you are ready to glue.

jewelart glass cabochan
glass cabochon

My glass journey using glue

For my first pendants in 2010, I used glue from B&Q that I’d been recommended, but I had mixed results with it. After spending some time researching glass glues on the internet, I moved over to E6000, which is the standard epoxy glue used by many glass artists as its easy to use, it comes premixed in a tube and isn’t expensive.
I bought my first extra-large tube of E6000 from America on eBay and it seemed to work fine, but the next tube that I got from eBay (England) I had problems with, so I went back to using the first tube and began having mixed results with this one too. I wondered as I’d been using it for a few years, whether over time the glue had lost its strength. Next, I purchased a small tube from an English bead company, but again I was getting mixed results and was sometimes having to reglue the pendants to make them secure, a lot of hassle.

I needed to find a better solution for my glass gluing and looked further into the other options available. One of the companies I buy my glass from recommends using the 3M epoxy glue, it’s quite expensive (costs 10x more than E6000), you have to mix it yourself, plus you need to wear a proper face mask.

I moved over to this glue at the beginning of 2016 and ‘touch wood’ it seems to be working, as I’ve been wearing a pendant I made and glued in February and the bail is secure.

well it should do too, as they say on their website that it will glue a car to the side of the wall!

jewelart glass pendants
I wear my own glass pendants, plus some of my family and friends wear them too and I want everyone that has purchased a glass pendant to enjoy wearing them.

Thanks for joining me on my creative journey, 
Sam Rowena, jewellery artist x